For shiny white surfaces:
Isolating paint and etch primer
Washing resistant according to
DIN 53 778 SM
Wet abrasion Category 2 EN 13 300
Covering power Category 2
PIGROL Nikotin- und Isolierfarbe is a white pigmented, water-based special paint and etch primer to isolate nicotine, grime and grease stains and water-soluble wood components.
FIELD OF USE
Isolating paint for masonry, plasterboards, mineral plaster, wood, plywood, chipboards and plywood boards as well as for old bearable varnish and dispersion coats.
Depending on roughness and absorbance of the surface approx. 8-10 sqm/ltr. per coat.
Isolating coats should be applied on the whole surface so no color differences appear in the subsequent coat.
If necessary a top coat with water-dilutable or solvent-based varnishes or dispersion paints may be applied after complete drying, except for nitro and two component paints.
Brushing, rolling, spraying (airless).
Stir well before use. Apply undiluted. Apply one coat when used as a primer, if used as an isolating coat it should be pre-tested if a second coat is necessary. Application temperature must not be below 8°C. Clean tools immediately after use with water and soap.
Depending on absorbance of the surface at 20°C/60% humidity dust dry after approx. 1 hour and after approx. 1,5 hours touch dry and after approx. 12 hours recoatable and dry.
Styrene acrylic emulsion, fillers, white pigment, additives, water, coalescent aid, preservatives.
2.5 ltr., 5 ltr. and 10 ltr.
See Technical Data Sheet!