Weather resistant, tinted transparent wood glaze based on alkyd resin for the exterior. 2 in 1 - system with film preservatives, can also be used as primer. It offers a deep penetration for a long-lasting wood protection of 7 years* and resistance against weathering, UV-rays, moisture and cracking. Open-cell, water repellent and environmentally friendly.
PIGROL DauerLasur is not an ordinary glaze coating. It penetrates deeply and intensivly into the wood, thereby strengthens the wood's ability to resist the damaging effects of the water. necessary.
UV-resistant, emphasizes the wooden structure. The wooden surface hardens and receives a very weather resistant silk gloss finish. The wood remains open-cell and breathable, so no chipping and flaking will occur. A controlled delay in he drying time ensures PIGROL DauerLasur goes on with no visible overlaps. When applying a maintenance coat, no costly pre-treatmend is required, just apply over previous coats of PIGROL DauerLasur.
FIELD OF USE
For all domestic and tropical types of wood, new and old.
Depending on roughness and absorbance of the wooden surface approx. 10-15 sqm/ltr. per coat.
Please consider higher consumption when applying to very absorbing wooden surfaces.
Brushing, rolling, dipping.
Depending on the absorbance of the surface at 20°C/60% humidity dry after approx. 12 hours. Ready to paint over after it has been drying for approx. 6 hours.
Please consider longer drying time at different conditions (e.g. colder or higher humidity).
Water soluble alkyd resin, additives, mineral pigments, water, sikkatives, preservatives, film preservatives.
The glaze needs UV light for the drying process.
750 ml, 2.5 ltr. and 5 ltr.*
*5 ltr. only in the color shades transparent, oak, chestnut, walnut and palisander
See Technical Data Sheet!
Deviations from the original shade are possible, as each monitor calibration varies.
*If treatment according to the guidelines of the current technical data sheet.